Most buyers are asked by their estate agent, mortgage broker, or solicitor whether they want a Level 2 or a Level 3 survey, and most buyers have no real basis for the choice. The two reports do different jobs. One is a reasonable default for a conventional home in reasonable condition. The other is the default for anything older, altered, or showing visible problems.
Here is how we think about it on an actual instruction, and the specific things that push a decision one way or the other.
What each report is
The RICS Level 2 Home Survey - the one you may know as the HomeBuyer Report - is a structured visual inspection against a standard RICS pro forma. Each element of the property gets a condition rating from 1 (no action) to 3 (repair or replacement needed as soon as possible), with brief commentary. Most Level 2 reports we produce run to 40-70 pages, including photographs. Time on site is typically 2-3 hours.
The RICS Level 3 Building Survey is a bespoke technical report. For every defect we identify, we set out the likely cause, the implications for the building, and the recommended remedy. It usually includes damp meter readings taken throughout the property rather than just in suspect areas, thermal imaging where it adds something diagnostically, and inspection of the roof void and sub-floor void where they are accessible. Level 3 reports typically run to 80-150 pages. Time on site is typically 4-6 hours.
Both reports are prepared under the RICS Home Survey Standard, both are written by a Chartered Surveyor, and both come with a follow-up call after delivery.
Pricing
Our starting fees are:
- Level 2 Home Survey from £400 incl. VAT
- Level 3 Building Survey from £600 incl. VAT
Larger or more complex properties are priced individually but always confirmed as a fixed fee in writing before you instruct. The £200 difference sometimes feels material; set against a property transaction it rarely is, and the depth difference between the two reports is substantially more than a third.
When a Level 2 is the right report
A Level 2 is appropriate when the property is:
- Built within the last 80 years - broadly post-1945
- Of conventional construction - brick cavity walls, pitched tiled roof, modern services
- Showing no visible defects, no obvious damp, no signs of movement
- Not substantially extended, converted or altered
The classic Level 2 instruction is a 1970s estate house, a 1990s detached in reasonable order, or a modern flat. You want a structured RICS view of condition, you want traffic-light ratings, you want a chartered surveyor's sign-off, and you do not want to pay for the deeper investigation that a Level 3 provides because there is nothing in front of the property that suggests it is needed.
When a Level 3 is the right report
A Level 3 is the better call when any of the following applies:
- The property is pre-1930. Victorian, Edwardian, or late Georgian housing is where the depth of a Level 3 earns its keep. Solid brick walls, lath-and-plaster ceilings, original timber floors, and a hundred-plus years of alterations all need interpreting. A Level 2 rating of "defect present" on a Victorian wall tells you much less than a Level 3 analysis of whether the pattern is cosmetic, historic and settled, or progressive.
- The property is listed, or in a conservation area. The consent framework affects what you can do to the building, which affects the repair specification we recommend. Listed buildings also tend to carry decades of alterations that may or may not have had consent, which has consequences for insurance and resale.
- The home has been significantly extended, altered or converted. Each alteration is an opportunity for workmanship to vary, for structural interventions to be made that are not visible, and for the junction between old and new fabric to behave differently from either side of it.
- There are visible defects worth investigating. Cracking at bay windows, damp staining in corners, roof slopes that have deflected, chimney stacks that no longer sit plumb - any of these points to something a Level 3 can properly analyse. A Level 2 rating is unlikely to be enough.
- The construction is unusual. Timber frame, thatch, system-built, non-standard - each has its own repair tradition and its own defect pattern.
- You plan to extend, convert, or significantly alter after purchase. A Level 3 gives you an informed starting point for a scope of works - what the fabric is actually like, what you can do with it, what you should not.
What a Level 3 includes that a Level 2 does not
To make the depth difference concrete, this is what shifts between the two reports on a typical instruction:
- Cause, implication and remedy for every defect. The Level 2 flags a defect and gives a condition rating. The Level 3 explains why it is there, what will happen if you leave it, and what putting it right actually involves.
- Indicative repair costings on request. Not a quote, but a guidance figure you can use to budget and to negotiate.
- Damp meter readings throughout. The Level 2 takes spot readings in suspect areas. The Level 3 reads the whole property so patterns are visible.
- Thermal imaging where it helps. We use it to identify missing cavity insulation, thermal bridging around alterations, hidden damp pathways and services routing that is not visible.
- Roof void and sub-floor void inspection where accessible. The Level 3 looks at the structural timbers, the insulation, any evidence of leaks, and the sub-floor ventilation. The Level 2 may note access but rarely pursues it.
- Construction and alteration history. A Level 3 sets out what the building is made of and reads the layered history of what has been done to it over its life.
- Renovation and extension advice. For properties you plan to change, the Level 3 sets out what the fabric can support and what it cannot.
Our default recommendations
Nine times out of ten the recommendation follows the property. For a conventional post-war semi in Woking that has not been altered and shows no visible defects, we recommend a Level 2. For a Victorian terrace in Richmond or Putney, an Edwardian villa in Weybridge, a 1930s semi with a loft conversion, or a period cottage in Chobham, we recommend a Level 3.
For modern executive new-build, neither is the right report - a new-build snagging survey is designed for that question and sits closer to what you actually need. Our new-build snagging page has the detail.
For specific concerns on a property you already know - a crack, a damp patch, a roof issue - a focused building defect report is faster and more affordable than a full survey.
If you are still unsure
Our Which survey do I need? guide walks through the full set of RICS report types side by side, including Red Book valuations, snagging surveys, defect reports and drone roof surveys.
Or send us the property address and a short description of your situation. A short conversation is usually enough for us to make a confident recommendation, and you will have a written quote the same working day either way.

Chartered Surveyor with more than fifteen years' experience of residential and commercial property across Surrey, Berkshire, Hampshire and South West London. RICS-regulated firm no. 897221.
Not sure whether your assessment is right?
Send us the rates bill or just the property address. We will look at the published assessment and tell you honestly whether there is a case worth pursuing. There is no charge for that first view.
Request a free rates reviewThis article is general information about how business rates work in England, written for ratepayers. It is not advice on any particular property, and the rules change. If a decision turns on it, take advice on the facts of your own case.